International
01.10.2024

Record Four Million Robots in Factories Worldwide

Record Four Million Robots in Factories Worldwide

The new World Robotics report recorded 4,281,585 units operating in factories worldwide – an increase of 10 %. Annual installations exceeded half a million units for the third consecutive year. By region, 70 % of all newly deployed robots 2023 were installed in Asia, 17 % in Europe and 10 % in the Americas. “The new World Robotics statistics show an all-time high in the number of industrial robots automating production around the world,” says Marina Bill, President of the International Federation of Robotics. “The annual installation figure of 541,302 units in 2023 is the second highest in history. It is only 2 % lower than the record of 552,946 units installed in 2022.”

Asia, Europe and the Americas – overview

China is by far the world′s largest market. The 276,288 industrial robots installed in 2023 represent 51 % of the global installations. This result is the second highest level ever recorded (2022: 290,144 units). The share of Chinese manufacturers in the domestic market has grown considerably since 2022, reaching 47 % in 2023. It has fluctuated around 28 % over the past decade. The operational stock was just shy of the 1.8-million-unit-mark in 2023, making China the first and only country in the world with such a large robot stock. Demand for robots is expected to accelerate in the second half of 2024, contributing to a more stable market by the end of the year. In the longer term, there is still a lot of growth potential in Chinese manufacturing, with the potential for 5 to 10 % average annual growth until 2027.

Japan remained the second largest global market for industrial robots, behind China. Robot installations reached 46,106 units in 2023 – down 9 %. This followed two strong years, peaking at 50,435 units in 2022 – the second-best result after 2018 (55,240 units). Demand for robots is expected to remain stagnant in 2024 but recover in 2025 and the following years to medium and upper single-digit rates.

The market in the Republic of Korea is trending sideways: Installations reached 31,444 units in 2023 – down 1 % year-on-year. The country was the fourth largest robot market in the world in terms of annual installations, after the United States, Japan and China.

India is one of the fastest growing emerging Asian economies. Robot installations increased by 59 % to 8,510 units in 2023, a new high. Demand from the automotive industry soared to 3,551 units – an increase of 139 %. Both car manufacturers and suppliers contributed to this development.

Europe

Industrial robot installations in Europe rose 9 % to a new high of 92,393 units. In total, 80 % of installations in 2023 could be attributed to destinations in the European Union (73,534 units, up by 2 %). Delayed projects were completed, and the backlog was cleared in 2023. Robot demand in the region also benefited from the nearshoring trend. In 2023, growth was strongly driven by the automotive industry investing in traditionally strong car manufacturing countries such as Spain (5,053 units  +31 %) but also in smaller markets such as Slovakia (2,174 units, +48 %) or Hungary (1,657 units, +31 %).

Installations in Germany, the largest European market and the only European one in the global top five, were up 7 % to 28,355 units. Installations in the second largest European market, Italy, declined by 9 % to 10,412 units. The third largest European market, France, was down 13 %, installing 6,386 units.

In the UK, industrial robot installations increased by 51 % to 3,830 units in 2023. Investment was driven by installations in the automotive industry, mainly for assembly tasks.

Outlook

The OECD expects global growth to stabilize. However, geopolitical headwinds are still perceived as a major risk and uncertainty factor. Recent crises have raised political awareness of domestic production capacity in strategic industries. Automation allows manufacturers to locate production in developed economies without sacrificing cost efficiency. By 2024, the global economic downturn will have bottomed out. Global robot installations are expected to level off at 541,000 units. Growth is expected to accelerate in 2025 and continue in 2026 and 2027. There are no signs that the overall long-term growth trend will end in the near future.

(Source: IFR International Federation of Robotics Press Release)

Schlagworte

AutomotiveManufacturingRoboticsRobots

Verwandte Artikel

Some of the 37 employees supported through Wall Colmonoy Ltd’s apprenticeship and higher education programmes, pictured with Managing Director Rob Davies.
04.03.2026

10 Years of Bespoke Apprenticeship Programme

Wall Colmonoy Limited is marking the tenth anniversary of its Bespoke Apprenticeship Programme, celebrating a decade of sustained investment in engineering skills and adv...

Additive Manufacturing Advanced Materials Apprenticeship Brazing Engineering Expertise Manufacturing Materials
Read more
25.02.2026

Recycling of Silicone Elastomers through Depolymerization

Project aims to enable circular use of silicon materials and conserve resources.

Automotive Circular Economy Climate Neutrality Energy EU European Green Deal Joining Plastics Material Net-Zero Plastics Polymers Recycling Sustainability
Read more
24.02.2026

ABB publishes its Annual Reporting Suite 2025

ABB published its Annual Reporting Suite 2025, which consists of its Financial Report, Corporate Governance Report, Compensation Report, Sustainability Statement and Inte...

Automation Automotive Data Centre Energy Low-Carbon Metal Net-Zero Railway Sustainability
Read more
Auch in diesem Jahr haben Branchenexperten aus Industrie und Forschung wieder die Möglichkeit, sich beim VDI-Kongress PIAE über aktuelle Kunststoffanwendungen im Automobilbereich zu informieren.
24.02.2026

VDI-Kongress PIAE mit neuem Veranstaltungsort

Seit über vier Jahrzehnten dreht sich beim VDI-Kongress PIAE (Plastics in Automotive Engineering) alles um Kunststoffe im Automobilbau – in diesem Jahr erstmals im Kongre...

Automobilbau Automotive Fertigungsprozesse Kunststoffe Leichtbau Recycling Werkstoffe
Read more
21.02.2026

Lantek at Fabtech Canada

Lantek, a global reference in software solutions for sheet metal processing, confirms its participation in an extensive schedule of international trade shows throughout 2...

Cutting Heavy Plates Industry Laser Manufacturing Pipes Processing Punching Sheet Metal Tubes
Read more