Trendthema
© pixabay/Dmitriy
07.08.2026

Emerging Bioplastics Drive Industry Growth

Bioplastics (plastic materials derived from renewable biomass sources) have been commercialised for over two decades, with polylactic acid (PLA) and partially bio-based polyethylene terephthalate (PET, or "polyester") now well-established. However, the innovation of novel bio-based plastics with advantageous material properties looks set to drive continued industry growth moving forward. Two notable examples include polyhydroxyalkanoates (PHAs) and polyethylene furanoate (PEF), both of which are expected to act as significant industry disruptors. In the new market report, "Bioplastics 2026-2036: Technology, Market, Players, and Forecasts", IDTechEx forecasts that the combined global production capacities of PHAs and PEF will expand towards 2M t per annum by 2036, with their combined market shares rising to account for 13 % of total global bioplastics production.

Can PHAs become commercially viable?

Unlike many synthetic bioplastics, PHAs are naturally occurring biopolymers produced entirely within living microorganisms. These microbes convert a range of renewable feedstocks (including sugars, fatty acids and methane biogas) into PHAs, with act as a form of energy storage and can account for up to 80 % of total cell volume. This enables the direct isolation of PHAs from bioreactors using either solvent extraction or enzymatic degradation methods. However, PHA production is consequently limited by batch-to-batch production methods that can be inconsistent and expensive.

IDTechEx analysis has shown that while PHA prices remain high (US$4–6/kg), these are falling as production scales up and both the fermentation and recovery steps of PHA production are optimized. Achieving cost parity with PLA (US$2–3/kg) is crucial to the success of PHAs, as they are both biodegradable plastics targeted at single-use applications including packaging, cups and cutlery. Enhanced biodegradability is a key selling point for PHAs which spontaneously decompose in marine environments, in contrast with the industrial composting required by PLA. Furthermore, the biocompatibility of PHAs (resulting from their microbial origin) enables commercial applications in biomedical equipment. Finally, PHAs also benefit from their tuneability: monomers of different lengths can be selectively incorporated using genetic engineering techniques, enabling the variation of the final PHA's structural and material properties.

How will PEF compete with PET?

PEF is a synthetic bioplastic produced via the polymerization of monoethylene glycol (MEG) with 2,5-furandicarboxylic acid (FDCA). Bio-based MEG derived from bioethanol is readily available having been commercialized for the production of partially bio-based PET. While bio-based FDCA production remains at the pilot stage, it can be obtained from fructose using a combination of fermentation and metal-catalyzed oxidation steps. As PEF's constituent monomers are both bio-based, it therefore offers a more sustainable alternative to PET.

Notably, PEF also provides enhanced mechanical, thermal and gas barrier properties, enabling the replacement of PET food packaging and textile fibers with disruptive PEF alternatives. While PEF is yet to be commercialized, this is set to be achieved from 2026 onwards as leading players in the PEF space ramp up their production of FDCA, establish partnerships and sign off-take agreements with brands. The combination of sustainability and performance benefits that PEF offers has attracted significant interest in its disruptive potential, driving investment that should enable an initial green premium to be overcome as production scales up. Moving forward, IDTechEx forecasts the exponential growth of the PEF industry, for which a which a CAGR of 88.7 % is expected through to 2036.

(Source: IDTechEx)

Schlagworte

BioplasticBiopolymersJoining PlasticsJPPEFPETPHAPLAPlasticsPolyethylene FuranoatePolyhydroxyalkanoatesPolymers

Verwandte Artikel

Enzymes are to be used to recover the original raw materials – resin and glass fibers – from polyurethane composites.
16.11.2026

Breakdown of Glass-Fiber-Reinforced Polyurethanes

The German Plastics Center SKZ joins with RWTH Aachen University to research a novel recycling path for glass-fiber-reinforced polyurethane composites by using special en...

Aerospace Composites Energy Glass Fiber Joining Plastics JP Plastics Polymers Polyurethane Recycling Turbines Wind Energy
Read more
13.11.2026

Fakuma 2026 Signals Shift Toward Integrated Manufacturing Solutions

Hymson Novolas has concluded its participation in Fakuma 2026, the 30th international trade fair for plastics processing where discussions showed that requirements for la...

Automation FAKUMA Handheld Laser Beam Welding Joining Plastics JP LBW Plastics Plastics Welding Radial Welding Trade Fair
Read more
13.11.2026

Ceresana Forecasts for the Growing Global Coatings Market

Ceresana has analysed the global market for architectural paints, wood and industrial coatings. The new market study forecasts a growing demand of about 2.9 % per year th...

Bio-Adhesives Coating Joining Plastics JP Market Study Plastic Polymers Polyurethane Resins Surface Treatment Surfacing Sustainability
Read more
First employed to demonstrate that new Reduced Carbon Footprint EPDMs from Trelleborg (pictured) can deliver up to 55 percent lower product carbon footprints compared to traditional EPDMs, certifying authority DEKRA has now verified the Trelleborg PCF calculation methodology.
11.11.2026

Trelleborg Carbon Footprint Methodology Verified

DEKRA, an internationally recognised certifying authority, has independently verified the Trelleborg Sealing Solutions methodology for calculating product carbon footprin...

Aerospace Carbon Footprint Climate Joining Plastics JP LCA Life Cycle Assessment NetZero Plastics Polymers R&D Sealing Sustainability
Read more
07.11.2026

Kunststoffindustrie fordert Ende der Plastiksteuer-Diskussion

Die Initiative „Wir sind Kunststoff“ begrüßt, dass das Bundeskabinett entgegen des vorläufigen Agendavorschlags keine Plastiksteuer im Eilverfahren beschlossen hat.

Bundesregierung Fügen von Kunststoffen Joining Plastics JP Kunststoff Kunststoffverarbeitung Kunststoffverpackung Plastik Plastiksteuer
Mehr erfahren