Suchergebnisse für „Heat Cracks“  19

Artikel  17

14.11.2026

Mould Repair by Laser

Of the ten typical defects found on moulds and dies, nearly all are local and can be repaired by laser build-up welding directly on the tool.

Read more
l. v. l. n. r.: Christian Renk, André Herzog, Inga Kilders und Thilo Sagermann
01.10.2026

From a Coil to an Industrial Process

Neovac is investigating how coatings can be deposited on steel under vacuum without changing its mechanical properties.

Read more
Graphite is a highly conductive material, both thermally and electrically. In its 2D form, Graphene exhibits the highest natural strength and stiffness of any known
30.09.2026

Binder Jetting of Graphite with Highly Engineered Geometry

The case study examines how researchers at the University of Applied Sciences and Arts of Southern Switzerland used Arc Impact’s Innovent X binder jetting system to produ...

Read more
03.09.2026

Concordia Research Could Help Improve Aircraft Engine Durability

A new self-repairing coating promises to make gas turbines more reliable and longer lasting. Andre Mayer, a Concordia postdoc from the Department of Chemical and Material...

Read more
20.08.2026

Lasers for AI Data Centers

Femtosecond lasers can be used to manufacture components for AI data center equipment, including parts used in advanced optical connections that speed up data transfer.

Read more
05.08.2026

Weld Overlay - the Right Coating for Your Next Job?

Over time, even the toughest metal parts can succumb to wear and tear, leaving operations vulnerable to equipment failure and unplanned downtime. Protective coatings, suc...

Read more
Extreme high-speed Laser Material Deposition (EHLA) enables the additive deposition of functional surfaces with high precision and speed. This allows components to be efficiently coated, repaired, or manufactured with close-to-final-contour precision.
10.06.2026

Longer Service Life for Moulds and Tools

Manufacturing and maintaining die-casting tools professionally is crucial to the foundry industry: As one of the most expensive assets, these tools play a decisive role i...

Read more
SEM images of the volume defects detected in the center of the welding nuggets, using the example of MDK 5 (left, solidification porosity) and MDK 9 (right, mixed type of solidification and gas porosity)
10.12.2025

Joining Dissimilar Aluminum Alloys by Resistance Spot Welding for Aluminium-Intensive Mixed Constructions

Resistance spot welding (RSW) pose a variety of challenges to users when joining modern aluminum alloys, especially when it comes to dissimilar joints between dissimilar...

Read more
Wevo’s 2K silicone adhesive enables efficient production with adjustable pot life and curing.
23.10.2025

Thermally Conductive Structural Adhesive

The new RTV silicone combines thermal conductivity with structural strength and residual flexibility – properties crucial for modern battery modules and power electronics...

Read more
18.07.2025

New LaserHybrid Welding System

Trumpf's product range includes systems for die and panel bending as well as large-format bending machines and fully automated solutions. The company counts on welding te...

Read more
07.07.2025

Efficient Induction Brazing for Ceramic-Steel Joints

The article describes a new brazing technique that involves metallizing the ceramic through vacuum brazing, followed by induction brazing with metal in air using flux. Th...

Read more
18.05.2025

Stronger and Safer Aluminium

Stronger and safer: New design strategy for aluminium combines strength with hydrogen embrittlement resistance.

Read more
18.10.2024

Underwater Weld Repairs - Requirements and Execution, Part 2

Part 2 of 3. Today, we will be featuring the factors influencing the weld quality in hyperbaric wet welding.

Read more
Susanne Szczesny-Oßing (Vorstandsvorsitzende EWM AG) trifft gemeinsam mit Vorstand und Aufsichtsrat auch zukünftig alle Entscheidungen im Sinne der gesamten EWM-Familie.
19.08.2022

EWM AG verkündet strategische Partnerschaft mit Armira

Im starken Verbund mit Armira entstehen für die EWM-Gruppe optimale Voraussetzungen, die außerordentlich positive Entwicklung zukünftig konsequent fortzusetzen.

Mehr erfahren
Der Plasma Cutter 125 bietet die optimale Lösung für Hand- und Maschinenschnitte von Blechen aus Stahl, Edelstahl, Aluminium, Kupfer und mehr bis zu einer Materialstärke von 57 mm.
18.08.2022

Neuer Plasma Cutter 125 sichert exzellente Schnittqualität

Schneiden, Fugenhobeln und Markieren von Stahl, Edelstahl, Aluminium oder Kupfer – mit dem Plasma Cutter 125 bietet Messer Cutting Systems immer die optimale Lösung. Das...

Mehr erfahren
Die Rundmesseranalyse imess S25 untersucht die Messerkante auf Ver-schleiß und Ausbrüche.
29.09.2021

Optische Prüfsysteme für die Blechindustrie

Hochgenaue optische Prüfsysteme in Kombination mit intelligenter Software zur Qualitätssicherung sind Kernkompetenz der imess GmbH. Die Produktpalette ist zugeschnitten a...

Mehr erfahren
Feinste Schweißnähte bei doppelter Geschwindigkeit mit dem innovativen Schweißprozess MicorTwin von Lorch.
21.07.2021

WIG-Nahtoptik mit MIG-/MAG-Geschwindigkeit

Bildhübsche Nähte bei maximaler Geschwindigkeit: Mit dem neuen Schweißprozess MicorTwin bietet Lorch Schweißtechnik die Möglichkeit, anspruchsvolle Sichtnähte, die heute...

Mehr erfahren