Suchergebnisse für „Emission Control“  42

Artikel  40

31.08.2026

Investigation on Reduction of Welding Fume Emissions Using Digitally Controlled Gas Metal Arc Welding Processes

As part of the IGF research project 01IF22017N / DVS Q6.3429, extensive welding fume investigations of various process control variants were systematically analysed in or...

Read more
Internal scrap
17.07.2026

Why the Future of Aluminium Lies in Scrap

International geopolitical tensions are putting pressure on primary aluminium supply chains. Limited availability of raw materials, combined with persistent geopolitical...

Read more
Laser metal deposition on a forged die: targeted material deposition helps restore worn or damaged tool areas and can reduce the need to replace entire high-value components.
14.07.2026

Expanding Industrial Applications for LMD and EHLA

Regulatory pressure, high-value repair and the need for scalable industrial solutions are pushing laser-based manufacturing processes into new territory. Fraunhofer ILT a...

Read more
06.07.2026

Digital Parameter Design and Quality Assurance for Process Transferability in Laser Cladding

As part of the HIP-LMD project, a hybrid process model for laser material deposition was developed that combines physical simulations with data-driven methods.

Read more
28.05.2026

Technology for the Energy Transition

Hargassner and Fronius are driving the energy transition, each in their own field but united in their approach.

Read more
18.04.2026

Chinaplas 2026: New Perspectives for Recycled Plastics

Plastics is now deeply embedded in various aspects of production and daily life. Meanwhile, the issue of plastic pollution has become increasingly critical, posing a coll...

Read more
08.01.2026

Rotterdam Shore Power selects ABB for Shore Power Project

ABB has signed contracts with Rotterdam Shore Power (RSP), a joint venture by the Port of Rotterdam and Eneco to engineer and construct shore power systems comprising mul...

Read more
Fig. 2. Influence of the shielding gas circulation speed on the process temperature.
17.12.2025

High-Resolution Temperature Field-Based Process Control for Laser Powder Bed Fusion

This research paper was previously published in the German specialist magazin SCHWEISSEN UND SCHNEIDEN.

Read more
Figure 1: (a) machine setup, (b) horn geometry, (c) joining partners
15.12.2025

Development of a Process Monitoring Method for Ultrasonic Metal Welding of Automotive Wires Based only on Machine Sensor Data

Specialist Article on Ultrasonic metal welding (USMW) for joining electrical conductors, especially in the context of lightweighting strategies that involve replacing cop...

Read more
Joining Plastics [EN]
10.12.2025

Polymer Stir Welding opens up new possibilities in the production of hybrid components

PSW, patented by royos joining solutions GmbH, Lieboch, Austria, is a modern welding process in the broader sense, developed primarily for joining thermoplastic polymers...

Read more
16.11.2025

Chinaplas 2026

On April 21 to 24, 2026, the plastics and rubber trade fair - Chinaplas 2026 will take place at National Exhibition and Convention Center (NECC) in Hongqiao, Shanghai, PR...

Read more
Thomas Häusle, CBO at EWM
SCHWEISSEN & SCHNEIDEN 2025 [EN]
05.09.2025

Interview: The Welding Industry through the Ages

EWM is taking a holistic approach to shaping the future of welding technology. The full-service provider from Germany is focusing on intelligent automation, digital netwo...

Read more
03.09.2025

Strategically Leveraging Gas Solutions

The demands on welding processes are rising significantly: they must be reproducible to ensure consistently high quality, low in emissions to meet environmental and occup...

Read more
SCHWEISSEN & SCHNEIDEN 2025 [EN]
28.07.2025

Automated Cutting and Drilling Processes

Under the trade fair motto "Precise cutting, perfect welding – complete solutions that connect and inspire," Messer Cutting Systems will be showcasing its combined expert...

Read more
SCHWEISSEN & SCHNEIDEN 2025 [EN]
11.07.2025

Future-Ready Solutions in Welding Technology

EWM will be presenting tried-and-tested solutions for automated and manual welding with focus on process reliability, digitalization and resource efficiency at SCHWEISSEN...

Read more
02.06.2025

Acoustic Monitoring for Laser Processing

Acoustic emissions expose whether a laser process runs steadily or drifts off course. Fraunhofer IWS develops acoustic monitoring systems that evaluate laser machining di...

Read more
01.06.2025

ABB Acquires BrightLoop

ABB announced it has signed an agreement to acquire BrightLoop, a French innovator in advanced power electronics, to accelerate its electrification strategy in industrial...

Read more
14.05.2025

SCHWEISSEN & SCHNEIDEN: Future Hub Debuts with Industry Highlights

From September 15 through 19, 2025, SCHWEISSEN & SCHNEIDEN once again brings together the global  joining, cutting and surfacing community at Messe Essen, Germany.

Read more
31.01.2025

Green Hydrogen Research in the U.S.

Innomotics, a global manufacturer for electric motors and large drive systems, has received an order from the U.S. Department of Energy’s National Renewable Energy Labora...

Read more
24.01.2025

JEC Composites Innovation Award 2025

The Multi Functional Fuselage Demonstrator (“MFFD”), which was developed in the European Clean Sky 2/Clean Aviation programme with the involvement of the Fraunhofer-Gesel...

Read more
31.10.2024

Technotrans and Enesty Form Strategic Partnership

technotrans and enesty are combining their expertise in tailor-made thermal management systems for the plastics processing industry. The partnership includes mutual integ...

Read more
A boost for new propulsion systems: Laser material deposition (LMD) is intended to ensure faster and more cost-effective production of propulsion nozzles for the next generation of rockets in the Ariane program (pictured: successful launch of an Ariane 5).
29.10.2024

Green Aerospace with 3D-Printing

The European Commission's targets are ambitious: the ReFuelEU Aviation Regulation stipulates a 60 percent reduction in CO₂ emissions from aviation by 2050 compared to 199...

Read more
10.09.2024

Focusing on Carbon Footprint for More Sustainable Welding

Fronius is taking a step in terms of sustainability and its use of resources by carrying out a certified life cycle assessment (LCA) for welding applications.

Read more
04.09.2024

Boost for Ultrafast Laser Material Processing

The Fraunhofer Institute for Laser Technology ILT in Aachen will be systematically exploring the potential of a new ultrashort pulse (USP) laser beam source from TRUMPF.

Read more
Primetals Technologies’ scrap torch-cutting machine results in heavily reduced noise levels and a streamlined process for the sorting and managing of scrap.
30.08.2024

Torch-Cutting Solution Streamlines Scrap Yard Processes

German special steel producer Lech-Stahlwerke has granted the final acceptance certificate to Primetals Technologies for an innovative scrap torch-cutting machine. The sy...

Read more
27.06.2022

Autogentechnik: VDMA Fachverband präsentiert virtuellen Showroom

Die Autogentechnik ist universell, flexibel und besonders effizient. Wo die zahlreichen Verfahren wie eingesetzt werden und was man alles darüber wissen sollte, das kann...

Mehr erfahren
Die neue Technologie vereint die Prozessschritte Dosieren und Voraktivieren mittels Licht und ermöglicht so innovative Ansätze zur Produktgestaltung.
13.04.2022

Neue Prozesstechnologie für Hightech-Klebstoffe

Mit der Durchflussaktivierung hat DELO eine innovative Prozesstechnologie entwickelt, bei der die Dosierung und Voraktivierung des Klebstoffs erstmals in einem Prozesssch...

Mehr erfahren
30.03.2022

Risiken von Staubbränden und Staubexplosionen richtig einschätzen

Staubbrände und -explosionen können überall dort auftreten, wo sich Partikel von brennbaren Materialien mit Luft mischen. Dazu gehören auch Metalle. Die Richtlinienreihe...

Mehr erfahren
22.03.2022

Adaptive Schweißprogrammbibliothek für das Widerstandspunktschweißen von Aluminium

Bei der Serienfertigung von Aluminium-Komponenten lässt sich die erforderliche Schweißqualität schon vorab sichern: Dies ermöglichen schweißzangenunabhängige adaptive Mas...

Mehr erfahren
Gratulation zum 200. Schweißer: Anar Bayramov (m.) nimmt die Glückwünsche von TIME-Geschäftsführer Dr. Ralf Polzin entgegen. Links Personaldisponentin Jennifer Pfeifer und Vertriebsleiter Benedict Julian Hamacher (bei stewe), Karl E. Starfeld und Anna-Lena Kegler von der Agentur für Arbeit sowie Thorsten Gorszka, Vertriebsleiter bei der GSI (r.)
18.03.2022

Bei TIME wurde der 200. Schweißer ausgebildet

Seit seiner Gründung vor 12 Jahren wurde bei TIME, dem Technologie-Institut für Metall und Engineering, der 200. Schweißer in Zusammenarbeit mit den regionalen Jobcenter...

Mehr erfahren
10.03.2022

Praxistipp: MAG-Schweißen: Die richtigen Gasdüsen nutzen

Schweißen mit dem MIG/MAG-Prozess verlangt Schweißern und der Schweißtechnik oft viel, manchmal sogar extrem viel ab. Deshalb muss die Schweißausrüstung hochwertig und ro...

Mehr erfahren
29.11.2021

VDMA Robotik + Automation veröffentlicht OPC UA für die Schraubtechnik

Um die interoperable Kommunikation in der Integrated Assembly Solutions-Branche voranzutreiben, hat der Fachverband VDMA Robotik + Automation die erste OPC UA-Spezifikati...

Mehr erfahren
Die Maschinenbauer und Prozessoptimierer Heinrich Georg GmbH mit Hauptsitz in Kreuztal setzt Roboter der neuen Shelftype-Serie bereits erfolgreich in seinen Produktionsanlagen zum Stapeln großer Blechbauteile für die Transformatorenkernfertigung ein.
24.11.2021

Motoman GP-Shelftype-Serie: Der lange Arm von oben

Im Sortiment von Yaskawa sind nun fünf Robotermodelle mit erweiterter Reichweite nach unten. Das ermöglicht die Entnahme von Werkstücken von oben und schafft Bodenfläche...

Mehr erfahren
Labordemonstrator eines vibro-akustischen Metamaterials mit periodisch angeordneten Resonatoren auf einer leichten Trägerstruktur.
28.10.2021

Neue Leichtbaupotenziale im Fahrzeug erschließen

Ziel des Forschungsprojektes „viaMeta“ ist, Leichtbaupotentiale zukünftiger Fahrzeuge zu erschließen und Strukturen konsequent zu verschlanken. Den Herausforderungen woll...

Mehr erfahren
18.10.2021

KEMPER Training Center geht an den Start

Gemeinsam mit bekannten Schweißexperten aus verschiedenen Social-Media-Kanälen hat KEMPER sein neues Training Center eröffnet. Im modernen Industriedesign eingerichtet, b...

Mehr erfahren
DVS Group
14.07.2021

Vier deutsche Preisträger vom Internationalen Schweißer-Verband geehrt

Am 7. Juli 2021 startete zum zweiten Mal die Jahresversammlung mit Konferenz des International Institute of Welding (IIW) online. Bei der Eröffnungsfeier wurden auch die...

Mehr erfahren
Beitrag mit Video
25.06.2021

Gratis-Test des Gas-Management-Systems EWR 2

Die patentierten Gas-Management-Systeme EWR 2 von ABICOR BINZEL helfen nicht nur dabei, den CO₂-Fußabdruck zu verringern, sondern tragen auch erheblich zu einer wirtschaf...

Mehr erfahren