Suchergebnisse für „DVS Research“  29

Artikel  27

14.10.2026

NbC-based Hardmetal Compositions as a Strategic Replacement Material for WC-Co(Cr) in Surface Engineering

IGF-project of the year 2026: Inspired by developments in powder metallurgy, in the present work four novel NbC(N)-based compositions with Fe- and Ni-based binders were d...

Read more
Winners of the IGF Project of the Year (f. l. t. r.): Jens Jerzembeck, DVS Research; Lutz-Michael Berger, Fraunhofer IKTS; Maximilian Grimm, TU Chemnitz; Lukas Tegelkamp, TU Chemnitz; Susan Conze, Fraunhofer IKTS; Thomas Lampke, TU Chemnitz
02.10.2026

DVS Forschung announces IGF Project of the Year

The IGF Project "NbC-based Hard Metal Compositions as a Strategic Material Substitute for WC-Co in Surface Engineering", which was initiated and applied for through the R...

Read more
Participants in the DVS 2281/2282 course
22.09.2026

International Knowledge Exchange at the Plastics Center

The SKZ Plastics Center recently welcomed two specialists from the United Arab Emirates to an intensive training and certification programme in the field of plastic weldi...

Read more
31.08.2026

Investigation on Reduction of Welding Fume Emissions Using Digitally Controlled Gas Metal Arc Welding Processes

As part of the IGF research project 01IF22017N / DVS Q6.3429, extensive welding fume investigations of various process control variants were systematically analysed in or...

Read more
27.07.2026

Call for Papers: Roboter 2027

The call for papers is now open for the ROBOTER 2027 conference and trade exhibition, taking place on February 16 and 17, 2027, in Hannover, Germany.

Read more
15.07.2026

DVS CONGRESS 2026: Register Now

The DVS CONGRESS 2026 takes place on September 14 and 15, 2026, in Erlangen, Germany. The event will focus on professional exchange about current challenges and research...

Read more
04.05.2026

ITSC 2027: Call for Papers

From May 12 through 14, 2027, the ITSC – International Thermal Spray Conference and Exposition will take place in Rotterdam under the motto “Next-Level Thermal Spray: D...

Read more
30.04.2026

ITSC 2026 Turns Bangkok into the Industry’s Capital

With approximately 1,000 attendees, ITSC 2026 again demonstrated its significance for the thermal coating industry. The conference served as a platform for scientific exc...

Read more
08.04.2026

ITSC Partnership Expands: Messe Essen Strengthens Organizing Team for 2027

The partnership behind the ITSC Exposition is set to welcome a new partner: Messe Essen will join forces with DVS Media to organise the exhibition for the world’s leading...

Read more
Group photo from the award ceremony with DVS Chief Executive Officer Dr.-Ing. Roland Boecking (right), Minister Daniela Schmitt (fourth from the right), DVS President Susanne Szczesny-Oßing (fifth from the right), and Arne Rössel, Managing Director of the Koblenz Chamber of Industry and Commerce (left).
24.01.2026

DVS President Susanne Szczesny-Oßing Awarded Economic Medal

Susanne Szczesny-Oßing, President of DVS – German Welding Society (Deutscher Verband für Schweißen und verwandte Verfahren e. V.), the State’s Economic Medal.

Read more
Figure 1: (a) machine setup, (b) horn geometry, (c) joining partners
15.12.2025

Development of a Process Monitoring Method for Ultrasonic Metal Welding of Automotive Wires Based only on Machine Sensor Data

Specialist Article on Ultrasonic metal welding (USMW) for joining electrical conductors, especially in the context of lightweighting strategies that involve replacing cop...

Read more
20.10.2025

Save the Date: ITSC 2026

The International Thermal Spray Conference & Exposition (ITSC 2026) is taking place from March 18 through 20, 2026, at the Queen Sirikit National Convention Center in Ban...

Read more
23.09.2025

SCHWEISSEN & SCHNEIDEN 2025 : Recognized as a Leading Business Hub

The world-leading trade fair for joining, cutting, and coating technologies offered from September 15 through 19, 2025, the opportunity to explore the latest technologies...

Read more
Dr.-Ing. Roland Boecking, Hauptgeschäftsführer des DVS
16.09.2025

Neue Studie: Fügetechnik trägt maßgeblich zur Wertschöpfung in Deutschland bei

Die Füge-, Trenn- und Beschichtungstechnik (FTB) ist eine wichtige Querschnittstechnologie, die mit dem gesamten verarbeitenden Gewerbe und der Entwicklung der Industrie...

Mehr erfahren
“Without joining, cutting and coating technologies, there would be no mobility and no energy supply,” says Dr. Roland Boecking, Executive Director of DVS.
16.09.2025

New Study: Joining Technology Contributes to Added Value in Germany

Joining, cutting and coating technology contributes with an added value of €30 billion in Germany to the joining, cutting and coating technology and is closely linked to...

Read more
SCHWEISSEN & SCHNEIDEN 2025 [EN]
15.09.2025

Join the Future – Let’s Shape It Together

The wait is over: The 21st edition of SCHWEISSEN & SCHNEIDEN opens its doors. This year’s motto is “Join the Future” – a guiding principle that also characterizes the DVS...

Read more
26.08.2025

SCHWEISSEN & SCHNEIDEN 2025: a Showcase for Future Technologies

From September 15 through 19, the international industry will gather at SCHWEISSEN & SCHNEIDEN, the world’s leading trade fair at Messe Essen, Germany, to take a collecti...

Read more
01.07.2025

ITSC 2026 Bangkok: Call for Papers

The world’s leading specialist event in the field of thermal spray technology (ITSC) will take place from March 18 through 20, 2026 at the Queen Sirikit National Conventi...

Read more
17.06.2025

Low Temperature Joining of Ni-Based Superalloys with Ni-Nanoparticles

This article explores joining with nickel nanoparticles, which melt and sinter at lower temperatures than bulk nickel - offering a promising alternative to conventional b...

Read more
Schweissen und Schneiden
14.06.2025

Lokales Fügen von rotationssymmetrischen Multimaterialbauteilen durch Laserstrahl- und Induktionslöten

Der Beitrag beschreibt die systematische Entwicklung zur Identifikation von Material- und Prozessparametern. Dabei werden die Materialpaarungen, Fügewerkstoffe sowie die...

Mehr erfahren
02.03.2025

SCHWEISSEN & SCHNEIDEN 2025: "We Must Embrace the Challenge"

Digitization and communication are the key topics of SCHWEISSEN & SCHNEIDEN (September 15 through 19, 2025 in Essen, Germany). A highlight will be the first-ever presenta...

Read more
10.02.2025

SCHWEISSEN & SCHNEIDEN 2025 – The Industry Shapes Its Future

SCHWEISSEN & SCHNEIDEN 2025, with the motto "Join the Future," is already emerging as the central hub of the joining, cutting and coating technology industry. Dr.-Ing. Ro...

Read more
25.11.2024

Additive Manufacturing as a Driver of the Future

Additive Manufacturing (AM) is transforming the manufacturing landscape, including in the welding industry. Marvin Keinert, Dr. Simon Jahn and Markus Langer highlight the...

Read more
19.10.2024

Underwater Weld Repairs - Requirements and Execution, Part 3

Today the mini serie "Underwater welding repairs" will be rounded off with some insight into case studies describing three types of underwater wet weld repairs.

Read more
18.10.2024

Underwater Weld Repairs - Requirements and Execution, Part 2

Part 2 of 3. Today, we will be featuring the factors influencing the weld quality in hyperbaric wet welding.

Read more
04.05.2022

Studie zu „Future Skills im Maschinen- und Anlagenbau“

Der Maschinen- und Anlagenbau in Deutschland befindet sich in der digitalen Transformation. Neue Technologien verändern die Prozesse in den Unter-nehmen und die Wertschöp...

Mehr erfahren
04.12.2021

In Corona-Zeiten Jahresgespräche mit Industriekunden führen

Industrieunternehmen handeln mit ihren wichtigen Lieferanten oft Jahr für Jahr die Lieferbedingungen und -konditionen neu aus. Aufgrund der aktuell instabilen Wirtschafts...

Mehr erfahren

Seiten  1